Pages

Tuesday, March 13, 2012

Pillowcase with Ric Rac Trim

This pillow case was a simple little project I made for my little boy using one yard of cotton quilting-weight fabric and about a yard of contrasting ric rac.

I had this cute fabric in my stash. I've been trying to use up what I have instead of buying new fabric and materials. The ric rack is from Beautiful Additions.

IMG_4551

Does anyone else call a pillow case a “pillow slip”? My grandmother always called them that. When I referred to a 'pillow slip' in college, a few friends laughed at me. Just wondering if anyone else has to remind themselves to say pillow "case"!!!

Anyway, my finished pillow case measures 19” in width and 33” in length.

Before starting, make sure to pre-wash and dry your fabric.

To make the opening, I measured down 6” from the top of the fabric. I pressed the fabric at this point, wrong sides together, to make a nice crease.

IMG_4539

Then, I opened the fold back up and folded the fabric back down to the crease.

IMG_4541

This is 3” from the top.

IMG_4540

I pressed it into place. Then I folded it again along the 6” crease. This hides the raw edge.

IMG_4542

IMG_4543

Next, I pinned it into place. I didn’t sew yet.

IMG_4544

I then pinned on the ric rac.

IMG_4545

I hid half of it behind the fabric so that just the points are showing. Then I sewed it in place.

IMG_4546

(Note: I’ve never used ric rac as a trim on a sewing project before, so this is just the way I did it. I don’t know if it is “technically” correct! This is just how I did it.)

Then I stitched 3" down from the ric rac to hold the rest of the flap in place.

IMG_4547

Here is what the inside of the pillow case will look like:

IMG_4554

I folded the pillow case in half and measured out the width I would need. 19” wide, plus 1/2” for seam allowance (x2, since the fabric is doubled over at this point).

IMG_4548

I cut the excess fabric off of the pillow case.

IMG_4549

Then I zig-zagged all the raw edges, matched up the edges and pinned it into place for the final seam to be sewn.

IMG_4550

After sewing around the bottom and one open edge, on the wrong side of the pillow case, I pressed the seams open. Then I turned it right side out and pressed the seams flat.

IMG_4552 IMG_4553

My son is excited to have a Clifford pillow case!

IMG_4556

It is fun to make things you know your child will love to use.

3 comments:

  1. I interchange pillowcase and pillowslip. Your son will love his Clifford pillowcase!!! It looks fabulous!!! The ric rac makes a great finishing touch. I would love for you to share this at our ongoing themed link party that's just for pillows and cushions...
    http://threadingmyway.blogspot.com/2012/03/yay-ive-made-something-for-me-its-first.html

    ReplyDelete
    Replies
    1. Glad to know you have at least heard of the phrase "pillow slip"! I did share the project link

      Delete
  2. Questo secondo aspetto, vedremo molto meglio all'interno dei diversi tipi di trapunte, piumoni o copripiumoni che vi mostreremo qui sotto.

    https://vogliadicasamia.it/categoria-prodotto/letto/copripiumino

    ReplyDelete

Spelling or grammar will not be criticized, so there's no reason not to leave me a comment!