Pages

Monday, February 27, 2012

DIY Hat Tutorial

Hats for young babies are very straight forward to cut and stitch. They just require two pieces of fabric and a brim. I’ve made a lot of those with this tutorial.
However, I’ve always struggled when trying to make hats for older children and adults. Using the same method as the baby hats yields an ill-fitting product, in my opinion.
The hats I’ve bought seem to have this extra seam to keep them from looking too tight or loose around the seam.
I cracked the code for making seamed adult hats. Here’s how I made this cute fleece hat for myself.
IMG_3905
Disclaimer: My pictures for this tutorial were taken in waning afternoon light. So they aren’t my best.
I started by taking a hat that fit me and folding it into quarters. I folded my fabric into quarters, too. (Kind of like you’re making a chain of paper dolls.)
IMG_3873
This is a picture of the fabric folded into quarters:
IMG_3874
I traced and then cut around the hat quarter. Here’s a visual of how your fabric should look. Kind of like a crown. Don’t worry. It’ll turn out a-ok!
IMG_3875
Next, fold the fabric together, right sides together, matching up the points.
IMG_3876
Sew up the side. Pivot your machine’s foot and then continue up the ‘triangle’ and stop when you get within 1/2” of the tip.
IMG_3877
Then you’ll sew the opposite triangle. And finally, finish the last two triangular sides. Sew over the peak of the hat to close the tip.
IMG_3878
Next, I added some blue fabric inside the brim. I did this so I wouldn’t have to hem the hat and also to add some warmth around the ears. I used the hem of a t-shirt so it would have a factory finished edge. I cut two 4” pieces to the width needed and sewed them with wrong sides together at the edges. (This way the seams will be on the inside of the hat and not touching your ears!)
IMG_3879
I then pinned the blue inner brim to the base of the outer hat fabric with right sides together. I sewed it into place.
IMG_3880
After it is sewn on, this is what the outside of the hat will look like. IMG_3881
Turn the hat wrong-side out. Fold the blue brim up toward the hat’s crown. Sew into place.
IMG_3882
This is what the right side of the hat will look like. If you use fleece, it will help to hide the seam.
IMG_3883
Here’s what the inside looks like:
IMG_3884
I added a cute little flower. I love yellow and gray together, so I cut a few pieces of grey knit scraps into irregular shapes.
IMG_3890
I stacked the shapes and sewed them together in the middle with embroidery floss.
IMG_3891 IMG_3897
IMG_4145
That’s it! You can make a hat of any size using this tutorial. (All you need is a hat that already fits.)

10 comments:

  1. Thanks for the tutorial, I never could figure out the top of the hat! I'll be pinning this and adding to my list of projects to do. Thank goodness winter is almost over, I can wait a while before I'll need another hat!

    www.onedogwoof.blogspot.com

    ReplyDelete
  2. Love this tutorial! New follower here! Would love to have you check out my site as well! Im hosting a BLOG HOP starting on Monday....would love to have you add your blog!

    www.pincushioncreations.com

    ReplyDelete
  3. Glad it was helpful for all of you!

    ReplyDelete
  4. Nice project. My boys lose a lot of hats. I think I'm going to try this using old sweaters.

    ReplyDelete
  5. Awesome tutorial.... I'm going to make a hat tjis weekend!

    ReplyDelete
  6. Thank you! I knew how to repair, but not how to sew from scratch.

    ReplyDelete
  7. I have a friend who’s little girl has cancer and needs hats to cover her head because she gets cold. This is a great tutorial for me to make some for her!! 💕💕

    ReplyDelete

Spelling or grammar will not be criticized, so there's no reason not to leave me a comment!